Disclaimer

General Disclaimer

The information and tools provided by ScreenPress (“https://www.inkbake.com”) are for general educational purposes only. Everything here is offered in good faith, but we make no representation or warranty of any kind, express or implied, as to the accuracy, adequacy, validity, reliability, or completeness of any information or result on the site.

Any use of the information or tools is entirely at your own risk. It is your responsibility to ensure the results meet your specific requirements and to verify them before acting.

A Planning Aid, Not a Substitute for a Test Print

ScreenPress’s calculators — the ink coverage calculator, the mesh count selector, the squeegee guide, the cure temp/time calculator, the emulsion exposure calculator, and the cost-per-print calculator — are designed to help you plan a job and check your numbers. They do not constitute professional chemical, safety, or engineering advice, and craft/DIY ink chemistry notes on this site are general-safety guidance only, not a substitute for your ink or emulsion manufacturer’s technical data sheet or safety data sheet (SDS). For any production run that matters — a paid job, a large batch, or a new ink or emulsion you haven’t used before — confirm every setting with a small test print first.

Results Are Estimates, Not Guarantees

The tools apply standard formulas and commonly cited screen-printing figures, and round their output for readability. Actual ink use, cure behavior, exposure time, and cost all vary with your specific ink brand, mesh, dryer, light source, and technique, so a displayed value may differ from what you observe on press. Always treat a result as a starting point.

Why a Result May Look Off

A calculator can return a surprising or unusable answer when:

• An input describes an unrealistic setup: for example, a mesh count or ink type combination well outside typical use, or a dryer tunnel length or cure time that doesn't match your actual equipment.
• Defaults don't match your materials: deposit thickness, ink density, and cure temperature all vary by brand and formulation — the calculators use commonly cited figures as defaults, which you can override where the tool allows it.
• Values are negative, zero, or otherwise invalid: dimensions, quantities, and costs must be positive numbers for a calculation to make sense.

No Warranty

ScreenPress expressly disclaims all warranties, whether express, implied, statutory, or otherwise, including implied warranties of merchantability, fitness for a particular purpose, and non-infringement. We do not warrant that our tools, calculations, or information are error-free or complete, or that the website will be available without interruption.

Limitation of Liability

To the maximum extent permitted by law, ScreenPress shall not be liable for any direct, indirect, incidental, special, consequential, or exemplary damages — including wasted ink, a spoiled print run, or other losses — arising out of or related to your use of our tools and services.

External Links & Advertising

The site may link to third-party websites and displays advertisements from networks including Google AdSense. We do not investigate, monitor, or endorse third-party content, and the presence of a link or ad is not an endorsement of any product or service.

Changes to This Disclaimer

We may modify this disclaimer at any time. Changes are posted here with an updated revision date, and your continued use of the site indicates acceptance of the changes.

Contact Us

If you have questions about this Disclaimer, please visit our Contact page or email us at support@inkbake.com.